![background image](http://html.mh-extra.com/html/echo/cs-4510/cs-4510_operators-manual_531894044.webp)
MAINTENANCE
CS-4510
44
X7503350603
© 06/2019 ECHO Incorporated.
Check Fuel System
• Check before every use.
• After refueling, make sure fuel does not leak from around fuel feed lines,
fuel grommet or fuel tank cap.
• In case of fuel leakage there is a danger of fire. Stop using the machine
immediately and request your dealer to inspect or replace.
Fuel Filter
• Check periodically.
• Do not allow dust to enter fuel tank.
• A clogged filter (A) will cause difficulty in
starting engine or abnormalities in engine
performance.
1.
Pull filter out through gas port, and inspect filter.
Do not damage fuel line while removing fuel filter from tank.
2.
When the filter is dirty, replace it as follows:
3.
Do not remove the wire coil clamp to remove the fuel filter. Pinch the
fuel filter with the fingers on one hand and the fuel line with the other
hand. Pull and twist slightly to separate.
4.
Install the new filter with the reverse action.
5.
When the inside of the fuel tank is dirty, rinse the tank out with gasoline
to clean it.
Note: Federal EPA regulations require all model year 2012 and later
gasoline powered engines produced for sale in the United
States to be equipped with a special low permeation fuel
supply hose between the carburetor and fuel tank. When
servicing model year 2012 and later equipment, only fuel
supply hoses certified by EPA can be used to replace the
original equipment supply hose. Fines up to $37,500 may be
enforced for using an un-certified replacement part.
A