manualshive.com logo in svg

Echo CS-4510, Руководство оператора

Поделиться
Скачать
Echo CS-4510 Скачать руководство пользователя страница 11

CS-4510

SAFETY

X7503350603

11

© 06/2019 ECHO Incorporated.

20. When using a chain saw a fire extinguisher should be available.

21. When felling, keep at least 2 tree lengths between yourself and your 

fellow workers

22. Follow instructions in your operator’s manual for starting the chain saw.

23. Never adjust the guide bar or saw chain when the engine operating.

24. When boring with the chain saw, the initial cut should be introduced 

with the lower part of the nose (tip) until the hole is sufficiently large so 
as to introduce the entire nose (tip) of the guide bar. This technique 
should reduce the danger of kickback.

25. Allow your chain saw to cool before refueling, and do not smoke while 

refueling.

Chain saws shall be used in accordance with the operating 
instructions and safety precautions listed in the operator's 
manual(s). It shall be the responsibility of the owner to see that 
such instructions and precautions are given to every operator 
who uses the saw.

◆

During operation, the muffler or catalytic muffler and 
surrounding cover become hot.

◆

Never suspend the saw on a lanyard with the engine 
running.

◆

Always use the saw from the right-hand side of your body –

 

NEVER 

from the left side.

◆

Always wear proper safety clothing to protect your lower 
body from sharp saw chain and hot muffler.

◆

Always keep exhaust area clear of flammable debris during 
transportation or when storing, otherwise serious property 
damage or personal injury may result.

Moving parts can amputate fingers or cause severe injuries. 
Keep hands, clothing and loose objects away from all openings.

◆

ALWAYS 

stop engine, disconnect spark plug, and make 

sure all moving parts have come to a complete stop before 
removing obstructions, clearing debris, or servicing unit.

◆

DO NOT 

start or operate unit unless all guards and 

protective covers are properly assembled to unit.

Содержание CS-4510

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды