OPERATION
CS-355T
38
X7503323507
© 01/2021 ECHO Incorporated
To fell big trees with a diameter
exceeding twice the bar length, start
the notching cuts from one side and
draw the saw through to the other
side of the notch. Start the back cut
on one side of the tree, pivoting the
saw through to form the desired
hinge on that side. Then remove the
saw for the second cut. Insert the
saw in the first cut, very carefully so
as not to cause kickback. The final
cut is made by drawing the saw forward in the cut to reach the hinge.
Limbing
Limbing a fallen tree is much the
same as bucking. Never stand on
the tree that you are limbing. When
limbing, caution is the word. Be
careful of the tip touching other
limbs. Always use both hands.
Don’t cut with the saw overhead or
aligned vertically with your body. If
the saw should kick back, you may
not have enough control to prevent
possible injury.
1
2
3
Содержание CS-355T
Страница 57: ...CS 355T PRODUCT REGISTRATION X7503323507 57 01 2021 ECHO Incorporated ...
Страница 58: ...NOTES CS 355T 58 X7503323507 01 2021 ECHO Incorporated NOTES ...
Страница 59: ...CS 355T NOTES X7503323507 59 01 2021 ECHO Incorporated NOTES ...
Страница 60: ...ECHO INCORPORATED 400 Oakwood Road Lake Zurich IL 60047 www echo usa com C67415001001 C67415999999 ...