![background image](http://html.mh-extra.com/html/echo/cs-355t/cs-355t_operators-manual_531846036.webp)
OPERATION
CS-355T
36
X7503323507
© 01/2021 ECHO Incorporated
Sap from palm trees may corrode metal parts unless proper saw
maintenance is performed. Make sure to clean metal parts from palm
sap immediately after use.
• Remove sprocket guard. Clean wood chips and sawdust from guard and
engine crankcase.
• Never use metal tools for cleaning which can scratch the metal paint and
allow corrosion to develop.
• Clean sap accumulation from metal parts with cloth and warm water with
soap.
• Rinse with clean water and dry metal surfaces.
• Apply a light coating of engine or bar and chain oil to metal parts after
they are cleaned.
• Install and properly tension guide bar and chain. Run engine for one
minute alternating engine speed between full throttle for 5 seconds and
idle for 5 seconds to coat metal parts with additional protective chain oil.
◆
Do not run a chain saw not under cutting load at wide open
throttle longer than 5 seconds or engine damage can
occur.
◆
Keep chain properly tensioned during operation to prevent
the chain from jumping out of the guide bar rail slot and
damaging metal engine parts.
Содержание CS-355T
Страница 57: ...CS 355T PRODUCT REGISTRATION X7503323507 57 01 2021 ECHO Incorporated ...
Страница 58: ...NOTES CS 355T 58 X7503323507 01 2021 ECHO Incorporated NOTES ...
Страница 59: ...CS 355T NOTES X7503323507 59 01 2021 ECHO Incorporated NOTES ...
Страница 60: ...ECHO INCORPORATED 400 Oakwood Road Lake Zurich IL 60047 www echo usa com C67415001001 C67415999999 ...