TOP HANDLE AND CONTROL SYSTEM
CS-271T
61
9-1 Replacing throttle control parts
1. Remove four screws securing top handle lid and
a screw securing rubber cushion.
2. Remove top handle lid.
3. Check throttle control parts and replace defec-
tive parts with new one as required.
4. Assemble throttle trigger (A) together with tor-
sion spring (B) on top handle.
5. Assemble throttle lockout (C) on top handle,
hooking torsion spring end (b) as shown.
6. Assemble throttle rod in the hole (a) of throttle
trigger.
7. Assemble top handle cover.
9-2 Replacing cushions
1. Remove sprocket guard.
2. Inspect cushion (A) for cracking, wear or sepa-
ration from metal part, replace as required.
NOTE:
When replacing cushion, remove cushion
cap (B) using needlenose pliers as shown.
NOTE:
When installing cushion, apply lithi-
um-based grease in cushion.
3. Remove two screws securing lower end of front
handle.
4. Remove top handle lid. Then remove screw se-
curing upper end of front handle and remove front
handle.
5. Remove air cleaner cover.
6. Check springs (C). If spring is damaged, replace
with new one.
C
a
A
B
A
B
b
C
Содержание CS-271T
Страница 1: ...Ord No 401 37 CS 271T ...
Страница 71: ......
Страница 72: ...Printed in Japan 1202 ...