Echo CS-271T, Руководство по обслуживанию

Страница: 48 / 72

SAW CHAIN LUBRICATION SYSTEM
CS-271T
46
7-4 Replacing oil line and grommet
1. Remove sprocket guard plate from the unit (Refer
to “7-3 Inspecting oil line”).
2. Disconnect oil line (A) from auto-oiler assembly
(B) together with clip (C).
3. Remove clip (C) from oil line (A).
4. Pull out oil strainer (D) from oil tank (Refer to “7-1
Inspecting oil cap and strainer”).
5. Pull out oil line (A) from the unit together with oil
strainer (D).
6. Remove grommet (E) with longnose pliers etc.
7. Insert new oil line (F) to new grommet (G).
8. Connect oil strainer (D) to oil line.
9. Pass oil strainer (D) through grommet hole (H)
and assemble grommet (G) to grommet hole.
10. Make sure oil strainer can move freely in oil
tank.
NOTE: If oil strainer cannot move freely in oil tank,
chain oil may not be supplied properly.
A
B
D
C
F
E
G
A
40mm
(1.6in)
H
D