5
4.5 INCH CHIPPER
ENGLISH
Section
2
ASSEMBLY
1.
Move the chipper deflector weldment located inside
the chipper housing to the down position (Figure 2.1).
2. Slide the discharge cap onto the chipper housing
(Figure 2.2).
3. Insert two 3/8" × 5-1/2" bolts into the bolt holes on the
chipper housing and tighten using 3/8" washers and
3/8" nylock nuts.
2.1 DISCHARGE CAP ASSEMBLY
Attach the chipper chute to the chipper housing using four
3/8" × 1" carriage bolts, washers and locknuts (Figure
2.3). Use two bolts on each side. Install with nuts on the
outside.
Figure 2.3, Chipper Chute
If any bolts or nuts are dropped in the machine, be
sure to remove them before starting the machine.
WARNING
2.2 CHUTE ASSEMBLY
Figure 2.1, Chipper Deflector Weldment
Figure 2.2, Discharge Cap
Attach the chipper chute extension to the chipper chute
using six 3/8" × 1" carriage bolts, 3/8" washers and 3/8"
nuts (Figure 2.4). Use three bolts on each side.
Figure 2.4, Chipper Chute Extension
3/8 X 1"
CARRIAGE
BOLTS
CHIPPER CHUTE
CHIPPER
CHUTE
EXTENSION
2.3 ATTACH CHIPPER CHUTE
(CE COMPLIANT MODELS)
