3
4.5 INCH CHIPPER
ENGLISH
SAFETY
1.6 SAFETY DECALS
Keep hands and feet out of inlet and discharge
openings while machine is operating to avoid serious
personal injury. Stop and allow machine to come to a
complete stop before clearing obstructions.
Read and understand this owner/operators
manual. Be completely familiar with the
controls and the proper use of this equipment
Obtain and wear safety glasses and use
hearing protection at all times when operating
this machine.
Before inspecting or servicing any part of this
machine, shut off power source, remove the
key, disconnect spark plug wire from spark
plug and make sure all moving parts have
come to a complete stop.
Check blade bolts for proper torque after every 8 hours of operation.
Check blades and rotate or resharpen daily or as required to keep
blades sharp. Refer to owners manual for instructions. Failure to do so
may cause poor performance, damage or personal injury and will void
the machine warranty.
Read and understand your owners manual before operating. If owners
manual was not included or you have any questions, please call
800.247.7335 or 701.282.5520 (U.S.A.).
See Section 1.7 for decal locations. Familiarize yourself with all of the safety and operating decals on the machine
and the associated hazards. See the engine owner’s manual or contact the engine manufacturer for engine safety
instructions and decals.
2
7
3
8
PN 12169
PN 12172
PN 14942-00
PN 12250
Contact with rotating driveline can cause
death. Do not operate without all driveline,
tractor and equipment shields in place. Ensure the driveline is securely
attached at both ends and driveline shields that turn freely on the
driveline are in place.
Do not operate this equipment in the vicinity
of bystanders. Do not allow children to
operate this equipment. Always stand clear
of discharge area when operating this machine. Keep face and body
away from discharge areas.
Do not operate machine without shields in place.
Failure to do so may cause serious injury or death.
PN 12174
Keep hands and feet out of inlet and
discharge openings while machine
is operating to avoid serious
personal injury. Stop and allow
machine to come to a complete
stop before clearing obstructions.
1
4
5
6
PN 12168
PN 12173
PN 12174
PN 12175