12
2. Allow cleaning mixture to soften the remaining gummy residue then
wipe it from the blade.
3. Apply clean oil to the entire length of the blade. Be certain the
blade bolts are lubricated.
4. Wipe excess oil from the blade before putting the unit back in
service.
5. Check blade tightness. Tighten blade bolts (A) until snug with 10
mm wrench. Loosen bolts 1/2 turn. Hold bolts (A) from turning and
tighten locknuts (B) with other 10 mm wrench.
Gear Case
Level
1.
Tools required:
Grease Gun with Lithium Grease, Rag.
Parts required:
Lithium Based Grease.
1. Clean dirt from grease fittings.
2. Carefully pump grease in each fitting.
DO NOT
force grease.
Too much pressure will force grease past seals and cause damage.
Apply 5-10 pumps of grease every 15-25 hours of operation.
