7
PAS T
RIMMER
A
TTACHMENT
O
PERATOR
'
S
M
ANUAL
1. LOWER DRIVE SHAFT ASSEMBLY - Includes the Debris Shield Assembly, Gear Housing assembly, Flexible Drive
Cable, Nylon Cutter Head and Safety Decals.
2. PLASTIC DEBRIS SHIELD ASSEMBLY - Included in plastic bag (co-pack). MUST be installed on unit before use,
see Assembly Instructions. Shield assembly includes the Cut-Off Knife and Safety Decal. Mounts on the Gear
Housing Assembly just above the cutting attachment. Helps protect the operator by deflecting debris produced
during the trimming operation. This shield must be replaced with the steel shield for blade use.
3. CUT-OFF KNIFE - Trims line to the correct length: 127mm from head to end of line after head is tapped on the ground
during operation and the line advances. If trimmer is operated without a cut-off knife the line will become too long. If
the line is more than the listed length the operating speed will slow, the engine overheat and engine damage may
occur.
4. NYLON CUTTER HEAD - Contains replaceable nylon trimming line that advances when the trimmer head is tapped
against the ground while the head is turning at normal operating speed.
5. OPERATOR'S MANUAL - Included in plastic bag (co-pack). Read before operation and keep in a safe place for future
reference, i.e., operation, maintenance, storage and specifications.
S
PECIFICATIONS
PAS Trimmer Attachment
NOTE Install U-handle and metal shield when using metal blade.
MODEL ----------------------------------------------------- PAS Trimmer Attachment
Shaft Length ------------------------------------------------ 870 mm (34.3 in.)
Attachment Width ----------------------------------------- 178 mm (7.0 in.)
Attachment Height ---------------------------------------- 255 mm (10.0 in.)
Weight (dry) w/line head --------------------------------- 1.43 kg (3.15 lb.)
Drive Shaft -------------------------------------------------- 1/4" Flex Shaft
Direction of Rotation -------------------------------------- Counter clockwise viewed from the top
Cutter Head ------------------------------------------------- Nylon line head (2-lines) with .095" Cross Fire™ Line
Line Capacity 6 m (20 ft.)
5
4
