Echelon IzoT U60 DIN, Руководство пользователя

Страница: 16 / 34

IzoT U60 DIN Network Interface User’s Guide
14
b. Click Comm to confirm the ability of the USB interface to communicate
with other devices on the network. The LonWorks Interface application
configures the USB interface to receive Service messages from other
devices on the network, and waits for messages. When the LonWorks
Interfaces application receives a Service message is received, the
LonWorks Interfaces application will ping that device every second, using
the selected network interface. After the pinging begins, the Comm
button changes to a Quit button. Click Quit to quit pinging the device.
c. Click Service to send a Service message to the network.
d. Click Reset to reset the selected interface. When you reset the interface,
the statistic counts retrieved with Test will be set to 0.
Removing a USB Network Interface
You can remove and reattach a U60 interface at any time. When you reattach a U60,
it will have the same logical name that it had the first time you attached it. You can
remove a L
ON
W
ORKS
USB network interface from the L
ON
W
ORKS
Interfaces
application to reuse the logical name reserved for the network interface. To remove a
L
ON
W
ORKS
USB network interface from the L
ON
W
ORKS
Interfaces application,
follow these steps:
1.
Unplug the USB network interface from your computer.
2. Open the L
ON
W
ORKS
Interfaces application in Windows Control Panel.
3. Click View in the main menu, and then click Show Detached Interfaces .
4. Click the network interface name for the network interface to be removed.
5. Click Remove in the toolbar.