Echelon FT 6000, Руководство по оборудованию

Страница: 11 / 35

6. Follow the instructions in the IzoT FT 6000 EVK Quick Start Guide to connect your Izot router.
7. If you are using the IzoT NodeBuilder tool, complete the quick-start exercise in Chapter 3 of the
IzoT NodeBuilder User’s Guide
. In the quick-start exercise, you will develop a device with one
sensor and one actuator. The sensor is a simple sensor that monitors a push button on the FT 6000
EVB and toggles a network variable output each time the button is pressed. The actuator drives
the state of an LED on the FT 6000 EVB based on the state of a network variable input.
The quick-start exercise guides you through all the steps of creating a device with the IzoT
NodeBuilder tool, including: creating the NodeBuilder project, the device template, the device
interface, and the Neuron C code that implements your device interface; plus, implementing
device functionality in the Neuron C code; building and downloading the device application;
testing the device in an IzoT network; and debugging the device application.
8. Run the Neuron C example applications included with the IzoT NodeBuilder tool on your FT 6000
EVBs. The NodeBuilder tool includes three Neuron C example applications (
NcSimpleExample
,
NcSimpleIsiExample
, and
NcMultiSensorExample
) that you can use to test the I/O devices on the
FT 6000 EVBs, and create simple managed and self-installed I
ZO
T networks.
FT 6000 EVB Hardware Guide 3