ECH2O Tec. Watermakers 200-BMS-1, Руководство пользователя

Страница: 5 / 21

AVAILABLE OPTIONS AND ACCESSORIES
If the high-pressure pump is installed less than 1 foot under the waterline or an
additional 5-micron pre-filter is added, the installation of an optional boost pump is
recommended.
Boost pump
(3/4” intake hose barb, 5/8” outlet hose barb, 4 feet / 1.2 meter 3/4”
wire reinforced intake hose, 10 feet / 3 meter 5/8” braided feed hose)
Fresh water flush kit
with boost pump (filter housing, charcoal cartridge, stainless
steel bracket, 8 screws, shut off valve, 2 x 5/8” hose barb connectors, 5/8” tee, 10ft
5/8” braided hose, 6 x 5/8” hose clamps)
Fresh water flush kit
without boost pump
(filter housing, charcoal cartridge,
stainless steel bracket, 8 screws, shut off valve, 2 x 5/8” hose barb connectors, 10ft
1/2” braided hose, 4 x 1/2” hose clamps)
Low pressure gauge
The low pressure gauge indicates when the pre-filters have to be changed.
An additional 5-micron pre-filter is only recommended in connection with the
optional boost pump
5 Micron Pre-filter Housing (1 filter housing, 1 pre-filter cartridge, 1 bracket, 1
3/4” NPT nipple)
Note:
The 5micron filter has to be installed as a second filter in flow direction
Maintenance Kit
10 Pre-filters, 5 and/or 20 microns
1 Spare sea strainer screen
2 Active carbon filters (fresh water flush)
1ltr. High-pressure pump oil
Extended Maintenance Kit
1 Acid-cleaning compound
1 Alkaline-cleaning compound
2 Storage compounds (Biocide)
1 Complete spare seal and O ring kit (except high pressure pump)