41
EN
CONNECTION
Speaker output
Plug the speakers into the respective speaker terminals using the
supplied cables (white to +, red to -).
Using the remote controller
Insert batteries into the remote controller. Direct the remote controller towards the remote controller sensor
on the head panel. The remote controller operates with a reach of 8 metres under a maximum angle of
30 degrees horizontally.
Inserting the batteries
1. Remove the cover
of the battery
compartment on the
back side of the remote
controller.
2. Insert two AAA/1.5 V batteries into the battery
compartment. Make sure the battery polarity
correct, and - on the inside of the
battery compartment with symbols.
3. Return the cover.
Note:
•
If you do not plan to use the remote controller for a longer period of time, take the batteries out.
•
Do not combine old and new batteries or diff erent types of batteries.
•
Dead batteries can leak and damage the remote controller.
•
Do not expose batteries to excessive heat, e.g. direct sunlight, fi re etc.
•
Be considerate towards the environment and dispose of old batteries according to local valid regulations.
Speakers
Speakers output
