EN
20
DESCRIPTION
1. Function
switch
2. Temperature
control
3. Air vent cover
4. Power
On
1
2
3
4
Before any manipulation with the device, always turn the thermostat control to minimum, switch the device
off using the function switch and unplug it. You will limit risk of injury by electric shock.
Requirements on installation
Place the hot air ventilator on a fl at surface with a suffi
cient amount of space around the appliance to ensure
the proper function of exhaust vents. Between the device and surrounding objects must be a distance of at
least 90 cm.
USING THE APPLIANCE
This hot air ventilator uses hot air technology with temperature regulation. You can set the required output
level by turning the function switch:
= off
= fan only
I
=
low 1200 W
II = higher output 2400 W
The red indicator light indicates the hot air ventilator has been turned on.
1. Turn the thermostat control clockwise to maximum.
2. When the required temperature in the room is reached, turn the thermostat control counterclockwise
until you hear light click indicating that the thermostat is off . The hot air ventilator and indicator light is
turned off .
3. The device now maintains the set room temperature. As soon as the room temperature drops, the hot
air ventilator will automatically switch on and after reaching the desired room temperature, will again
automatically switch off .
Safety thermal fuse
1. The device is also equipped with a safety thermal fuse, which automatically switches the device off if it
experiences overheating.
2. In the event of overheating, switch the fan off using the function switch, unplug it and let cool at least
10 minutes. Afterwards, you may connect the device and turn it on again.
