GB
20
USING THE APPLIANCE
Note:
Wash the bottle with the cap and the blade unit prior to first use. Be careful, the blades are very sharp.
1. Put the sports bottle on an even surface and open it.
2. Fill the bottle with favourite ingredients.
Do not fill above the maximum mark indicated on the bottle!
3. Attach the blade unit to the open end of the bottle.
4. Turn the bottle upside down and attach the bottle with the attached blade unit to the base of the blender.
Make sure that the microswitch block is in proper position.
5. You start blending by pushing the bottle down into the base.
6. Turn the bottle clockwise in the base to secure the bottle, so that you do not have to hold it during
preparation of the beverage.
7. When you stop pushing the bottle or when you release the bottle from the base by turning it
counterclockwise, the blender stops.
8. Turn the bottle and place it on a flat surface, remove the blade unit and fasten on the bottle the cap with
drink opening.
Reference table of times for food processing
Food
How to use
Maximum amount
Carrot and potatoes
In pieces
100 g of each and 200 ml of water
Carrot and onion
In pieces
100 g of each and 200 ml of water
Apples
Peeled and diced
200 g
Melon
In pieces
200 g
Strawberries
Whole
200 g
Soup
Mixture
Up to maximum mark
Carrot and water
In pieces
228 g carrot, fill with water up to maximum mark
Notes
•
Protect bottle with attached blade unit from children!
•
The appliance may be in continuous operation max. 30 seconds!
Before you use it again, let it
sufficiently cool down.
•
Do not use to crush ice. If you want to make a drink with ice, use ice slush.
•
Cut fruit into pieces first. Cut tougher ingredients, such as e. g. carrots into little pieces, size 1.5 × 1.5 cm.
•
The device is designed for liquids and soft fruit only. The device is not suitable for hard fruit.
•
The motor automatically stops when overheated. In such a case, unplug the device from power supply,
empty it and wait 15 minutes for the motor to cool down. Then you can use the device again.
•
Do not use warm liquids.
CLEANING AND MAINTENANCE
•
Unplug the appliance from the power supply prior to cleaning!
•
When cleaning, never immerse the base with the motor and the power cable in water!
•
After it was used, wipe the body of the appliance with wet cloth and then dry thoroughly with dry cloth.
Protect the appliance from water and high humidity!
•
Wash the bottle and the blade unit under running water.
•
The device and its individual parts cannot be washed in the dishwasher.
•
Do not use thinner, benzene or other aggressive cleaning agents for cleaning.
•
Protect from direct sunlight and wet environment.
