GB
GB
82
by moving the combs forward or backward. The numbers on the attachment
correspond to the length of the cut in mm.
1. Comb the beard in the direction of growth.
2. Start cutting the bear close to the ear and move to the chin on one side
and then repeat it on the other side.
3. If you want to trim a beard or mustache for a very short length or when
trimming the shape, use the beard trimmer head without a comb
attachment. The beard trimmer blade is directed at the beard at the
correct angle.
4. The variable attachment allows you to adjust the cut length on 6 levels.
Numbers 4, 6, 9, 12, 15 and 18 correspond to the length of the cut in
mm, if the fine adjustment is in position 1 (lowest position of the sliding
switch). If the fine adjustment is in position 3 (the highest position of
the sliding switch), the selected cut length will be slightly shorter.
5. Hold the comb attachment with the rounded side at the beard and cut
from the bottom upwards against the direction of the beard growth.
6. When cutting the mustache, first comb the mustache straight down.
Then use either a beard trimmer attachment or a precision cutter
attachment. Start in the middle above the mouth and cut first one side,
then the other.
Precision trimming head
1. Using the attachment for precise trimming, trim
the shape of the mustache, contours on the cheeks,
sideburns and eyebrows.
2. Place the blade of the attachment onto the required
height of the hairline and move down with the device.
Shaving attachment
Note:
The skin must be clean and dry.
1. Hold the device at the correct angle to the surface of
the skin and carefully move it over your face.
2. Shave against the growth of the beard.
3. At the places of the face which are more difficult
to shave like a chin, stretch your skin to get better
results.
Содержание GRS 5540 CC
Страница 87: ......