![background image](http://html1.mh-extra.com/html/norelco/qc5560-40/qc5560-40_manual_1704963001.webp)
2
To contour the hairline around the ears,
comb the hair ends over the ears.
3
Push the ON/OFF switch up to turn on the
appliance.
4
Tilt the Clipper in such a way that only one
edge of the cutting element touches the hair
ends. Be careful not to trim too much. The
hairline should be close to the ear (Fig. 11).
5
To contour the neckline and the sideburns,
turn the Clipper and make downward
strokes (Fig. 12).
NOTE: Move the Clipper slowly and smoothly.
Simply follow the natural hairline.
6
Adjust the position of the rotating head to
make contouring easier.
Cleaning
w
Clean the Clipper after each use.
w
Always switch Clipper OFF, unplug and remove
power supply cord from Clipper before
cleaning.
w
Do not use compressed air, abrasive cleaning
agents, scourers or aggressive liquids such as
gasoline, acetone or ethereal oils to clean
the Clipper and attachments.
w
Never clean, replace or remove Clipper
attachments with motor ON.
w
Do not use Clipper if cutter or cutting
element are damaged or broken as injury may
occur.
w
Use a soft, dry cloth to clean Clipper handle.
During Use:
w
If cut hairs have accumulated in the comb
area, remove hairs by shaking, blowing or using
cleaning brush provided.
Cleaning the Cutting Element and
Comb After Each Use:
1
Make sure the Clipper is switched OFF
and disconnected from the electrical outlet.
2
Remove comb (Fig. 10).
3
Blow and/or shake out any hair that may
have accumulated in the comb.
4
Rinse the comb under the tap or clean it
with the cleaning brush supplied.
5
Put your thumb on the center of the cutting
element and put your index finger on the
teeth of the cutting element. Lift your index
finger (1) so the cutting element releases
from the swivel head (2) (Fig. 13) .
Be careful that the cutting element does not fall to
the floor.
6
Clean the cutting element under the tap
or with the brush supplied (Fig. 14).
Make sure the cutting element is thoroughly dry
before reattaching to Clipper.
7
Clean the inside of the swivel head with the
brush supplied.
8
Clean the handle and the adapter with the
cleaning brush supplied or with a dry cloth.
9
Insert the notch of the cutting element into
the slot on the swivel head and push until the
cutting element ‘clicks’ into place (Fig. 15).
This Clipper has no other user-serviceable parts.
For assistance call 1-800-243-3050.
Assistance
For assistance, visit our website:
www.philips.com/support or
call toll free: 1-800-243-3050
Online information is available 24 hours a day,
7 days a week.
Storage
w
Be sure Clipper is turned OFF. Remove cord
from outlet and Clipper before storing in a
safe, dry location where it will not be crushed,
banged, or subject to damage.
w
Do not wrap cord around Clipper when
storing.
w
Store cord in a safe location where it will not
be cut or damaged.
w
Do not place or store Clipper where it can fall
or be pulled into a tub or sink, water or other
liquid while plugged in.
4222 002 8310 2
ENGLISH
IMPORTANT
SAFETY
INSTRUCTIONS
When using an electrical appliance, basic safety
precautions should always be followed, including
the following:
Read all instructions before using this
appliance.
DANGER
To reduce the risk of electric shock:
1. Do not reach for a corded clipper that has
fallen into water. Unplug immediately.
2. Do not use while bathing or in a shower.
3. Do not place or store clipper where it can
fall or be pulled into a tub or sink. Do not
place in or drop into water or other liquid.
4. Always unplug this clipper from the electrical
outlet immediately after using.
5. Unplug and remove power supply cord from
clipper before cleaning.
WARNING
To reduce the risk of burns, fire, electric
shock or injury to persons:
1. Close supervision is necessary when
this appliance is used by, on, or near children
or invalids.
2. Use this clipper for its intended household
use as described in this manual. Do not use
attachments not recommended by Philips
Electronics North America Corporation.
3. Never operate this clipper if it has a
damaged cord or plug, if it is not working
properly, if it has been dropped, damaged, or
dropped into water. For assistance call
1-800-243-3050.
4. Do not rinse or immerse the clipper in
water or any other liquid.
5. Keep the clipper, cord and any attachments
away from heated surfaces.
6. Never drop or insert any object into any
opening.
7. Do not operate or plug in clipper outdoors
or where aerosol (spray) products are being
used or where oxygen is being administered.
8. Always check cutters, cutting unit and comb
before using the clipper. Do not use the
clipper if cutters, cutting unit or comb are
damaged, as injury may occur.
9. Always attach plug to clipper first, then to
outlet. To disconnect, turn on/off switch to
“OFF” position, then remove plug from
outlet.
10. To prevent possible damage to the cord, do
not wrap cord around the clipper.
11. Never put clipper in direct sunlight or store
at a temperature above 140°F.
12. This clipper is for use on human hair only.
Do not use this clipper for any other
purpose.
13. Always store your clipper, attachments and
power plug in a moisture-free area. Make
sure the cord is disconnected from the
clipper.
14. Only use the power plug and other
accessories supplied with the appliance.
SAVE THESE
INSTRUCTIONS
IMPORTANT: The power plug contains
a transformer. Do not cut off the power
plug to replace it with another plug as this
will cause a hazardous condition.
Registration
Congratulations on your purchase and welcome
to Philips Norelco!
To fully benefit from the support that Philips
Norelco offers, register your product at
www.norelco.com/register
A Cutting Element
B 180° Rotating Head
C Hair Length Setting Adjustment Ring
D ON/OFF Switch
E Regular Comb
F Hair Length Setting Indicator
G Adapter
H Cleaning Brush
Full Two-Year Warranty
45-Day Money-Back Guarantee
Put It To The Test
Like many new products, your Philips
Norelco
Hair Clipper
may take a little getting used to. If you
are using an electric Clipper for the first time, or if
you’ve been using a different brand, take the time
to acquaint yourself with your new Hair Clipper.
Your Hair Clipper features a 180° pivoting head to
comfortably clip even hard-to-reach areas of your
head.
Throw your scissors away and put your new
Hair Clipper to the test. We guarantee precise,
professional results or Philips
Norelco will refund
you the full purchase price as long as the request
is received within 45 days of purchase.
Hair Clipping
w
Use this Clipper for its intended household
use as described in this manual.
w
Use and store the Clipper at a temperature
between 40°F and 95°F.
w
If the appliance is subjected to a major change
in temperature, pressure or humidity, let the
Clipper acclimatize for 30 minutes before using.
w
If you are clipping someone else's hair, make
sure that the head of the person is at the same
level as your chest so that all parts of his/her
head are clearly visible and within easy reach.
w
Only use the appliance on clean, dry hair.
w
Do not use on freshly washed hair.
w
Before you begin, comb the hair in the direction
of growth (Fig. 1).
w
To achieve optimal clipping results, always move
the appliance slowly through the hair against
the direction of hair growth.
Clipping with comb attachment
1
Be certain the Clipper is in the OFF position.
2
Insert the appliance plug directly into the
Clipper and plug the adapter into any 120V
AC outlet. Use only the cord provided.
3
Slide the comb into the guiding grooves on
both sides of the Clipper swivel head and
push until you hear it ‘click’ into place (Fig. 2).
Make sure the comb locks properly into position.
4
Turn the Hair Length Setting Adjustment Ring
to set the comb to the desired setting (Fig. 3)
as indicated on the comb (Fig. 4). See Table 1
for settings.
Do not turn the length setting adjustment ring
beyond the highest hair length setting.
5
The arrowhead on the Clipper indicates
which setting has been selected.
When you are clipping for the first time, start at
the maximum clipping length setting (#5) of the
comb to familiarize yourself with the appliance
and prevent accidentally trimming hairs too short.
As you become familiar with the settings, adjust
the Hair Length Selector to desired trimming
length.
TIP: Use different settings to create a natural and
smooth transition between various hair lengths from
your neckline to the top of your head (Fig. 5).
Using the rotating head
w
At the starting clipping position of 0˚ (pointing
forward), turn the rotating head 45˚ or 90˚ to
the left or right to adjust the position of the
cutting element to the part of your head you
are clipping (Fig. 6).
1
Turn the rotating head left or right to the
desired clipping position. At each position
you will hear a ‘click’ (Fig. 7).
Always adjust the position of the cutting element
by turning the rotating head. Do not turn the
rotating head by holding the cutting element or
the comb attachment.
2
The rotating head allows you to hold and use
the Clipper like a styling comb (Fig. 8).
Do not turn the rotating head more than 90° to
the left or right.
3
Push the ON/OFF switch up to turn on the
appliance.
4
Make sure that the flat part of the comb is
always in full contact with the scalp to obtain
an even result.
5
Since all hairs do not grow in the same
direction, move the Clipper slowly over the
crown from different directions (i.e. upwards,
downwards and across) to achieve an even
result (Fig. 9).
6
Always move the Clipper slowly against the
direction of hair growth.
7
Make overlapping passes over the head to
ensure that all hairs that should be cut are
cut.
8
As you clip different areas of your head,
adjust the position of the rotating head
so that the rotating head position is most
comfortable for you.
9
For best results with curly, sparse or long
hair, use a styling comb to guide the hair
towards the Clipper.
10
Turn the Clipper off regularly during clipping
and remove the hair comb to blow and/or
shake out hair that has accumulated.
When you remove the comb, the selected setting
does not change.
TIP: Write down the settings you have used to create
a certain hairstyle as a reminder for future clipping
sessions.
Contouring without a comb
attachment
w
Use the Clipper without a comb to clip very
close to the skin (1/32 in/0.5mm).
w
Be careful when you are clipping without a
comb as when the Clipper is turned on it will
remove every hair it touches.
1
Remove the comb by pulling it off the
rotating head (Fig. 10).
Never pull at the flexible top of the comb. Always
pull at the bottom part.
A
E
F
B
C
D
G
H
1
– 3 mm
– 5
– 7
– 9
– 11
– 15
2
– 5
– 7
– 9
– 11
– 15
3
#1
#2
#3
#4
#5
#1
#2
#3
#4
4
#5
#3
#2
#1
5
45º
180º
90º
0º
45º
90º
6
– 3 mm
– 5
– 7
7
8
9
– 3 mm
– 5
– 7
– 9
– 11
– 15
10
11
12
1
2
13
14
Features
45-DAY MONEY-
BACK GUARANTEE
If you are not fully satisfied with your Philips Norelco
Clipper send the product back and we’ll refund you the
full purchase price.
The Clipper must be shipped prepaid by insured
mail, insurance prepaid, have the original sales
receipt, indicating purchase price and date of
purchase, and the money-back guarantee return
authorization form enclosed. We cannot be
responsible for lost mail.
The Clipper must be postmarked no later than
45 days after the date of purchase. Philips
Norelco reserves the right to verify the purchase
price of the product and limit refunds not to
exceed suggested retail price.
To obtain money-back guarantee return
authorization form, call 1-800-243-3050 for
assistance.
Delivery of refund check will occur 6–8 weeks AFTER
receipt of returned product.
Full Two-Year Warranty
Philips Electronics North America Corporation warrants each new Philips
Norelco product, Model QC5560 (except cutters and comb) against
defects in materials or workmanship for a period of two years from the
date of purchase, and agrees to repair or replace any defective product
without charge.
IMPORTANT:
This warranty does not cover damage resulting from
accident, misuse or abuse, lack of reasonable care, the affixing of any
attachment not provided with the product or loss of parts or subjecting
the product to any but the specific voltage.* Use of unauthorized
replacement parts will void this warranty.
PHILIPS ELECTRONICS NORTH AMERICA CORPORATION
WILL NOT PAY FOR WARRANTY SERVICE PERFORMED BY
A NON-AUTHORIZED REPAIR SERVICE AND WILL NOT
REIMBURSE THE CONSUMER FOR DAMAGE RESULTING FROM
WARRANTY SERVICE PERFORMED BY A NON-AUTHORIZED
REPAIR SERVICE.
NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES.
In order to obtain warranty service, simply go to www.philips.com/
norelco or call 1-800-243-3050 for assistance. It is suggested that for
your protection you return shipments of product by insured mail,
insurance prepaid. Damage occurring during shipment is not covered by
this warranty.
NOTE:
No other warranty, written or oral, is authorized
by Philips Electronics North America Corporation. This warranty gives
you specific legal rights, and you may also have other rights which vary
from state to state. Some states do not allow the exclusion or limitation
of incidental or consequential damages, so the above exclusion and
limitations may not apply to you.
*Read enclosed instructions carefully.
Manufactured for:
Philips Consumer Lifestyle
A Division of Philips Electronics North America Corporation
P.O. Box 10313, Stamford, CT 06904
This symbol on the product’s nameplate means it is
listed by Underwriters’ Laboratories, Inc.
Norelco is a Registered Trademark of Philips Electronics
North America Corporation.
PHILIPS is a Registered Trademark of Koninklijke Philips Electronics N.V.
© 2013 Philips Electronics North America Corporation. All Rights Reserved.
ENGLISH
Comb
Barber
Setting
#1
•
#2
#3
•
#4
#5
Table 1 Comb Settings
Remaining
Hair Length
1/8 in./3mm
3/16 in./5mm
9/32 in./7mm
3/8 in./9mm
7/16 in./11mm
1/2 in./13mm
5/8 in./15mm
QC5560
Corded
Headgroom
1
2
15
Register your product and get support at
www.norelco.com/register
Always here to help you
Question?
Contact
Philips
Norelco
Question?
Contact
Philips
Norelco
13_QC5560.indd 1
1/25/13 1:51 PM