GB
47
WASHING MACHINE INSTALLATION
Removal of the packaging material
Packaging material protects your washing machine during transportation. Packaging materials are
environmentally friendly and recyclable. By recycling, you save resources and protect the environment.
Removal of the locking screws
Before you start using the machine, it is ESSENTIAL that you remove the locking screws at the rear of the
machine which protect the drum during transport. The warranty does not apply to damage caused by running
the washer with installed locking screws
X
4
X
4
X
4
Using a suitable wrench,
loosen the lock screws by
turning them counter-
clockwise.
Remove the loosened
locking screws.
Insert the supplied plugs in
the holes from the locking
screws.
Keep the locking screws
for possible future
transportation.
Setting the adjustable feet
•
Do not place the washing machine on carpets or similar surfaces, which would block the ventilation under
the washing machine.
•
To ensure quiet operation without vibration, place the washing machine on a non-slip and fi rm surface.
•
You can level the machine using the adjustable feet.
•
Turn to adjust the feet up or down.
•
Never compensate for uneven fl oor by inserting cardboard, wood or similar materials under the washing
machine.
•
Diagonal check: When pushing on the corners of the washing machine it should not swing. Check both
diagonals. If the washing machine sways, adjust the feet length.
•
When cleaning the fl oor under the machine, be careful not to change the level of the washing machine.
Up
Down
Lock nut