ECG EDB 6007 QXA++, Инструкция по эксплуатации

Страница: 53 / 72

GB
53 53
53
C. Insert a funnel (supplied) into the opening of the dispenser and pour into it about 2 kg of salt. A small
amount of water usually overfl ows from the dispenser.
D. Screw the lid back properly after fi lling the dispenser.
E. Usually within 2–6 days after fi lling the salt container the salt indicator light goes off .
Note:
1. Salt should be added when on the control panel the salt indicator lights up. Before the salt fully dissolves,
the salt indicator is lit even after the salt has been replenished.
2. If you spill salt around the container, start the soaking / rinsing program, which removes salt.
FILLING THE RINSE AID DISPENSER
The rinse aid function
Rinse aid is automatically dispensed for the fi nal polishing process and prevents spotting and streaking upon
drying.
WARNING
Use only brand name rinse aids for the dishwasher. Never fi ll the rinse aid dispensers with other substances
(e.g. dishwasher cleaner, liquid detergent). The dishwasher could be damaged.
When to replenish the rinse aid dispenser
When the rinse aid content decreases, the extent of indicator’s dark parts changes as shown in the picture.
Full
3/4 of the content
1/2 of the content
1/4 of the content – necessary to replenish to prevent spots.
Empty
RINSE AID DISPENSER
2
1
3
1. Open the dispenser by turning the cap to the arrow “open” (left) and remove the lid.
2. Pour in the rinse aid carefully so it does not overfl ow.
3. Put the lid back on, fl ush with the arrow “open”, and close it by turning right towards “closed”.
The rinse aid is released during the fi nal phase of the program during polishing. This prevents forming drops
on the dishes, which would leave them with stains and smudges. Also, it speeds drying and water draining
from the dishes.
D (rinse aid indicator)
1
2
3 4
5
6
MAX