ECG EDB 6007 QXA++, Инструкция по эксплуатации

Страница: 51 / 72

GB
51 51
51
dishwasher. The drain hose should be attached by a clamp. The free end of the hose must not be submerged
in water.
POWER CONNECTION
Before connecting the plug of the power cord into an electrical outlet, check the following:
•
The outlet is grounded and complies with current standards.
• The outlet is suitable for the maximum power of the appliance, which is indicated on the rating plate on
the inside of the door.
• The outlet voltage corresponds to the one on rating plate of the appliance.
• The type of outlet matches the type of plug of the power cord of the appliance. Otherwise, ask an
authorized technician to replace the improper outlet. Do not use extension cords or power strips to
connect the dishwasher.
STARTING THE DISHWASHER
Before starting the dishwasher, you need to check the following items.
1. The dishwasher stands straight and fi rm.
2. The intake valve is open.
3. Hose connections do not leak water.
4. The power cable is properly connected.
5. The outlet is powered.
6. The supply and drain hoses are not pinched or twisted.
7. All packaging and labels are removed from the dishwasher.
WARNING
• After installation keep the instruction manual.
• The content of the manual provides important information for the user.
OPERATING INSTRUCTIONS
BEFORE FIRST USE
Before fi rst operation:
1. Set the water softener.
2. Pour in the salt dispenser 500ml of water and add dishwasher salt.
3. Fill the rinse aid dispenser.
4. Fill the detergent dispenser.
Water softener
Adjust the water softener manually using the water hardness dial.
The function of the water softener is to remove from the water minerals and salts
that could adversely aff ect the operation of the dishwasher. The higher content
of minerals and salts the harder is the water. The water softener should be set
according to the hardness of your water. Your water supplier should provide you
with information about your water hardness.
Setting the salt consumption
The dishwasher allows to regulate the consumption of salt depending on the hardness of the water used.
Thus can be the salt consumption optimized and regulated. When regulating the salt consumption, proceed
as follows:
Salt dispenser can be set from H0 to H7, when setting is H0, the salt is not dispensed.
Determine the hardness of your water (this information can be obtained from your water supplier), and set the
dose according to water hardness table:
1. Close the door.