Ecco Pro Vantage 12+ Series, Инструкция по установке и эксплуатации

Страница: 13 / 20

Options and Maintenance:
Occasional cleaning of the lenses will ensure optimum light output. Take care when
cleaning lenses – although tough, polycarbonate scratches easily. Clean the lens and
base with soap and water or a lens polish using a soft cloth. Do not use solvents as they
may damage the polycarbonate. Do not subject the lightbar to high-pressure washers or
automatic car washers.
Lens Removal and Installation
1. Remove the screws from the lenses. Starting at one edge, pull the lens off.
2. Carefully lift the lens off the seal – choose a suitable location to temporarily store the
lens so as to not scratch the surface.
3. When reinstalling, gently apply pressure around the lens taking care not to damage
the seal. Replace the screws.
Warning LED Modules (EZ1203X, EZ1206XX)
The LED lightheads have been designed to ensure long service life using high performance
LEDs. The modules are low profile units that have a high intensity output with low current draw.
The LED lightheads can be mounted in the front, rear and corners of the lightbar.
Alley / Takedown / Worklight LED Modules (EZ0003)
Alley / Takedown / Worklight LED Module can be mounted anywhere in the lightbar.