16
|
P a g e
E730 Defra instruction manual |
current as of May 2015
All information supplied by
Ecco Stove
TM
is a trade mark of Landy Vent UK Limited copyright©EccoStove2015
Ecco Stove
| Foster House
| 2 Redditch Road,
Studley,
B80 7AX, United Kingdom
T
| +44 (0)1527 857 814
E
W
| www.eccostove.com
Patent pending USA, Canada, Europe & Russia | UK Patent nos: 2467433 & 2498883
Must extend 150mm either side or 300mm in front of the Ecco Stove as a minimum or to suit in country
requirements if different from the above.
APPLIANCE ASSEMBLY
Items shown with an * should be lifted in with a proprietary lifting frame.
All other items should be lifted by two or more people.
PARTS
A*
LOWER BOTTOM PART
To be placed on level structural hearth, this section must be laid level
and minimum 75 mm from rear wall or 400mm if combustible.
(The lower circular hole at the rear of the appliance must remain plugged
with the vermiculite plug fitted unless outside air kit is to be fitted).
B GRATE SECTION
This inner section is lowered into Part A and the cast iron grate
fitted within. (No seals are fitted to this part). Ensure it is
Model 730
BASE FITTING
Aa Slide the ash can assembly into the opening in the lower
bottom part.
Ab Fit the two smaller cleaning plugs into the holes on the
Front of the lower bottom part.
