ECA • 10 Mountain View Drive • Shelton, CT 06484 • Phone: 1-800-521-3175 • Fax: 203-924-6687
www.electri-cable.com
9065-0002 RevF
3
Innovat ive Power + Dat a Solut ions
If INTERCEPT 2 doesn’t operate, check:
1. INTERCEPT 2 is plugged into a powered outlet.
2. Twist-Lock connector between Power Unit and MAIN HOUSING is completely locked into place by
twisting.
3. Motor connector is completed latched.
Step 8.
ROCKER SWITCH MOUNTING – Mount the ROCKER SWITCH ASSY. in a convenient location using #10 x
½ screws provided. Secure wire as needed.
Step 9.
VOICE/DATA CONNECTIONS - Raise the INTERCEPT 2, remove the 4 VOICE/DATA Plates, using the
special tool provided, and snake the VOICE/DATA wires up through the OUTER PAN and through the 2
SHUTTER BUSHINGS in the bottom of the MAIN HOUSING. Wires should be dressed to move freely up and
down with the movement of the MAIN HOUSING. This step can be done before mounting the INTERCEPT 2
however, be sure all wires are run through the cutout in the OUTER PAN before completing step 5.
Congratulations. Enjoy your Intercept 2.
PARTS LIST
Inner
Pan
Assembly
Qty
1
Outer Pan Assembly
Qty 1
Rocker
Switch
Assembly Qty
1
Table Brush
Qty 4
7/64
Allen
Wrench
Qty
1
#10 X ½ Pan Head Screw
Qty 20
#4 X ½ Pan Head Screw
Qty 12
Table
Preparation
Instructions
Qty
1
Installation
Instructions
Qty
1
Housing
Adjustment
Instructions
Qty
1
