EC-PACK EC-JET 1000Pro Скачать руководство пользователя страница 30

Страница: 30 / 120

Guangzhou EC-PACK Packaging Equipment Co., Ltd.

EC-JET 1000Pro Continuous Inkjet Printer

more.

This key is to set Chinese character input mode.

4.3

Checking the Current Status of the Printer

The EC-JET printer provides two on-screen visual guides as to its current status (condition)

– the System

Status Line and the PRINT STATUS screen.

4.3.1

System Status Line

System Failures

System failures occur when a condition is detected that prevents normal printer operation.

If a System Failure message is displayed, contact your local distributor immediately. Note any

information from the display as this will help diagnosis of the problem.

Print Failures

Print Failures occur when a condition is detected that affects printing.

If a Print Failure occurs, a message is displayed on the System Status Line and, if the jet is running, a jet

shutdown sequence is started.

System Warnings

System Warnings inform the user of problems which may affect the operation of the printer but are not

serious enough to turn off the printer. However, they should be acted upon at the earliest possible

opportunity.

4.3.2

Print Status Screen

The PRINT STATUS screen shows the current state of the printer with respect to jet status, ink and

solvent levels and print count, and lists errors logged in the system.

The PRINT STATUS screen is accessed by pressing

the F2 key from the CURRENT

MESSAGE screen. (See “Using the System” - “Checking the Printer Status”)

4.4

Checking the Printer Status

To check the current printer status, press the

key from the CURRENT MESSAGE screen.

Содержание EC-JET 1000Pro

























































































































Результаты поиска

Содержание EC-JET 1000Pro

Отзывы:

EC-PACK EC-JET 1000Pro, Руководство пользователя, Страница: 30 / 120

Результаты поиска

Содержание EC-JET 1000Pro

Отзывы: