EC-PACK EC-JET 1000Pro Скачать руководство пользователя страница 21

Страница: 21 / 120

Guangzhou EC-PACK Packaging Equipment Co., Ltd.

EC-JET 1000Pro Continuous Inkjet Printer

3.4.2

Cursor Control Keys

The left/right arrow keys are used to scroll through the multiple choices/values of a menu

option.

The up/down arrow keys are used to select messages and move up and down through

the options of a menu.

The cursor keys are also used to move the edit cursor when creating or editing patterns to

be printed.

3.4.3

Text Control Keys

This key is to lock the keyboard into upper case and type upper case (Capital)

characters.

This key is to delete the character at the current cursor position without moving the cursor.

This key is to shift the typing mode to Number and Character.

This key is to shift the typing mode to English.

This key is to display and undisplay the QWERTY keyboard.

3.4.4

General Control Keys

This key is to return you to the previously selected menu.

This key is to tell the printer that you have finished making your selection and you want the

printer to act upon it.

Содержание EC-JET 1000Pro

























































































































Результаты поиска

Содержание EC-JET 1000Pro

Отзывы:

EC-PACK EC-JET 1000Pro, Руководство пользователя, Страница: 21 / 120

Результаты поиска

Содержание EC-JET 1000Pro

Отзывы: