EC-PACK EC-JET 1000Pro Скачать руководство пользователя страница 24

Страница: 24 / 120

Guangzhou EC-PACK Packaging Equipment Co., Ltd.

EC-JET 1000Pro Continuous Inkjet Printer

NOTE:

Printing will stop but the jet will remain running.

3.6

Advanced Editing Features

To make editing easier and give further control over the appearance of messages, there are a number of

extra features available from the keyboard.

3.6.1

Moving to Pixel (Drop) Locations

Each character of a message is made up of a number of drops. Each drop is called a pixel.

Press

key, and

will be displayed, then press

key or

key, cursor will

move one pixel each time.

This is useful when the spacing between characters needs to be adjusted to improve readability and/or

appearance. Also, this makes it possible to adjust the position along a vertical axis, perhaps to

centralize a 7 high field against a 16 high fiel

3.6.2

Moving to the Beginning of Message

In the Editable condition, press

key twice, and

will be displayed, then press

key or

key, cursor will move 20 rasters backward.

3.6.3

Quick shifting the Character Font or New line

In the Editable condition, press

key to shift the first character (between English and

Chinese) or to begin a new line, which improves the speed of character shifting or new line beginning.

Содержание EC-JET 1000Pro

























































































































Результаты поиска

Содержание EC-JET 1000Pro

Отзывы:

EC-PACK EC-JET 1000Pro, Руководство пользователя, Страница: 24 / 120

Результаты поиска

Содержание EC-JET 1000Pro

Отзывы: