Ebyte E180-Z5812SP, Руководство пользователя

Страница: 13 / 31

Chengdu Ebyte Electronic Technology Co., Ltd. E180-Z5812SP User Manual
Copyright ©2012–2019
，
Chengdu Ebyte Electronic Technology Co.,Ltd.
12
Network
status
Read 0
、
2
、
3 It indicates the network status of the device, including
no network, successfully joined the network, with
network but no parent node.
Target
network
address
Read/Write 0x0000
～
0xFFFF The communication target address (short address) can
be switched at any time through configuration
command.
Local MAC
address
Read 64 bit MAC The MAC address assigned by the network, can not be
changed by the user (changed when re-accessing the
network)
Target
MAC
address
Read/Write 64 bit MAC In fixed-point mode, long address is used
Device type Read/Write E
、
S Non sleeping terminal and sleeping terminal
Channel Read/Write CH11
～
26 Physical channel of ZigBee communication
Transmissio
n mode
Read/Write 0
、
1
、
2
、
3
、
4
、
5
Broadcast mode, multicast mode, short address unicast
mode, long address unicast mode, protocol unicast mode
and protocol multicast mode. For details, please check
the corresponding mode introduction
Output
mode
Read/Write 0
、
1
、
2
、
3
、
4
、
5
Transparent communication, data+short address,
data+long address, data+RSSI, data+short
RSSI, data+long RSSI
TX power Read/Write -37dbm
～
7dbm In the case of high requirements for low power
consumption and no requirements for distance, the
transmission power can be reduced to save the average
power consumption
Remote
configuratio
n ID
Read/Write 2 bytes It is used to judge whether the data received by the
wireless is a remote configuration command. The user
can change the remote configuration ID according to the
need, and the default is A8 8A
Local
network
group
number
Read/Write 1
～
254 It is used to configure the group number of the device in
the network
Target
network
group
number
Read/Write 1
～
254 It is used to configure the group number of the
corresponding target during multicast
Wake up
period
(sleep time)
Read/Write 0
～
2010 / second It is used to configure the wake-up cycle of the terminal
sleeping device. The larger the wake-up cycle, the lower
the overall power consumption, but the greater the delay
of receiving data
Parent node
lost
reconnectio
Read/Write 1
～
254 / minute When the parent node is lost (the coordinator is powered
off), the terminal device reconnects to the previous
network at regular intervals