Chengdu Ebyte Electronic Technology Co.,Ltd.
E104-BT09 User Manual
Copyright ©2012–2023
，
Chengdu Ebyte Electronic Technology Co.,Ltd.
21
configures the module according to the instructions shown in 6.4 Command Table;
7.2 Data transmission
For data transfer related instructions see the description in 5.3 Data Transfer Modes.
Test conditions:
Prepare to support host mode module 1 (in the example, we use our E104-BT08).
Test software: XCOM.
Other parameters are configured by default.
7.2.1 Air configuration
1. Power up the master and slave modules;
2. Modify module 1 to be the master (input AT+ROLE=1) and reboot (input AT+RESET).
3. After successful connection, the master prints "\r\n STA:connect:0\r\n"; the slave does not print any information; the
LINK pin is high, as shown in Fig. 7.5 Host power-on automatic connection printout
