EBS PX200N, Инструкция по установке и программированию

Страница: 46 / 58

PX200N_Manual_en-1.11i7 Page 46 / 58
7.11. DEVICE MONITOR
“Device Monitor” provides real-time information on device state. To use this function
device must be connected to PC computer with LX-DATA cable (using DEBUG plug).
Correct RS232 port must be chosen in “Port” field. “Device monitor” provides
following information:
•
AC power indication
•
Battery power indication
•
PSTN line indication
•
GSM network signal level indication
•
Bit-Error-Rate level measuring
•
Inputs and outputs state monitoring
•
Type or serial number of device
•
Firmware and hardware revision
•
Device time
These parameters are also shown in LOG window in text style. All data can be saved
to file.
Note: Outputs OUT1 and NC-NO-C in the Device Monitor window are presented as,
respectively, OUT1 and OUT2.