EBS PX200N, Инструкция по установке и программированию

Страница: 13 / 58

PX200N_Manual_en-1.11i7 Page 13 / 58
6. CONFIGURATION PROGRAM
6.1. INITIAL REMARKS
GPRS transmitters configurator software may be downloaded at
http://www.ebs.pl
(login: pxn@ebs.pl, password: pxn).
To install program an installation wizard shall be started that performs installation
in default place C:\Program Files\EBS\. During installation process shortcuts on
screen and Windows menu are created.
If device is to be used for the first time it shall be programmed with the
above program and after this procedure the SIM card may be inserted into the
device. Otherwise SIM card may be blocked if wrong PIN code is entered.
Alternatively SIM card may be used along with switched off PIN code.
In case of remote programming it is necessary to insert SIM card prior to
sending configuration settings. In this situation SIM card with switched off PIN code
shall be used or before card inserting, PIN code shall be changed with mobile
phone.
6.2. COMPUTER – REQUIREMENTS
Minimum requirements for computer system where configuration software is to be
installed :
Hardware:
o
Processor Pentium II 400 Mhz,
o
64 MB RAM,
o
1 GB HD.
o
CD-ROM,
o
RS-232 serial port
o
Colour monitor (minimum 15 inch , min. 800x600 resolution),
o
Keyboard
o
Mouse
Software:
o
Operation system Windows 2000, Windows XP or Windows Vista
o
NET Framework 2.0 (delivered along with installation wizard of configuration).
6.3. PROGRAM FUNCTIONS
After installation and program starting a main view shall be displayed on screen.
Thanks to this view an access to program or programmable parameters of device is
possible.(See chapter 7).
Main window of program is divided into some fields.