EBS LX20G Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 69

EBS LX20G Скачать руководство пользователя страница 36

LX20G_Manual_en_v2.1

Page 36 /

69

7.5.

RESTRICTIONS

7.5.1.

SMS and data calls (CSD)

In this section you can define limits for the phone numbers which are allowed to

send SMS commands to the transmitter, and establish a CSD connection. You can
also specify the validity period of outgoing SMS messages, and limits on sending

SMS.

7.5.1.1.

SMS Authorized phones

User may restrict remote access to the device (via SMS) for determined phone

numbers. A list of numbers (up to 5 numbers) determines which numbers are

allowed to connect with transmitter.
Available options:



Deny all: means no available telephone communication.



Allow all: means that telephone communication is possible from any phone.



Allow chosen: means that telephone communication is possible only from these

numbers that are on the list. It is possible to list up to 5 phone numbers.

Select “Allow chosen” to get access to edition window. Enter another numbers and

click on [Add] button to send them to the below table. Position cursor on line with

number and click on “Remove” to remove number from table.
Click on “Remove all” to remove all numbers from table.

Note:

a) authorizing of coming SMS comes through comparing number of oncoming SMS

with numbers from table. It is allowable to enter only a part of number e.g. 1234.

«
...
34
35
36
37
38
...
»

Содержание LX20G






































































Отзывы:

Нет отзывов