CPX220NWB ALARM CONTROL UNIT – INSTALLER MANUAL
56 / 123
5.3.1.7.
File -> Exit
Ends the program operation.
5.3.2.
Menu -> Operations
5.3.2.1.
Operations -> Read
The function reads the data saved in the memory of GPRS module. Data is exchanged
through the port selected in the section “Select connection type” (see the description
of “Configuration” option below). A correct readout is confirmed with relevant
message. You can save the data downloaded from the equipment in a file (see item
5.3.1.3.), and then use it for other devices.
You can use that function after you define a type and parameters of the connection.
E.g. for local connection the following window is displayed:
where:
Connection – type of connection to the device.
Service code – access code of the equipment.
For detailed description of connection configuration, please refer to item 5.3.1.5.
5.3.2.2.
Operations -> Write
The function is similar to the above, but it allows recording data to the memory of the
device. It is also possible to set internal timer of the device. For the above you have
to check the box “Set the time” and enter a respective date and time. A correct entry
is confirmed with a relevant message.
