Ebrington Medical CareFusion MicroLab, Руководство по эксплуатации

Страница: 16 / 24

20
External Printing
When printing, the MicroLab will default to an external USB printer,
if connected.
Using the USB cable provided connect the mini A/B socket on the
right hand side of the MicroLab to the input socket on the printer.
For a list of compatible printers refer to the web site
www.carefusion.com/micromedical or contact your local dealer.
It is recommended that during printing the batteries are on charge
with the unit connected to the mains adapter.
NOTE: Keep the printer out of reach of the patient at all times.
Charging Procedure
The MicroLab’s internal batteries are discharged when shipped from
the factory and should be fully charged on first use. Plug the AC
adapter into the mains supply and plug the adapter output plug into
the power input socket on the right hand side of the instrument.
The orange charging light next to the power input socket will flash to
indicate charging and will turn on constantly to indicate full charge.
The batteries will take approximately 4 hours to become fully
charged.
Note: Use only the AC adapter supplied. Use of any other type may
cause permanent damage to the MicroLab and cause a fire or
electrical hazard. Do not plug in and remove the power lead from
the AC adapter repeatedly.
PC connection using SPCS
SPCS is an easy to use PC based windows application that interfaces
to the MicroLab via a USB or serial port. It incorporates a database