ebm-papst W3G500GN3307-LA1, Руководство по эксплуатации, Страница: 3 / 12

Part Number
Operating Instructions
Item no. LS-105. Revision 003 Release 30/06/2017 Page 3 of 12
ebm-papst A&NZ Pty Ltd
10 Oxford Road · Laverton North VIC 3026 · Phone +61 (03) 9360 6400 · Fax +61 (03) 9360 6464
ABN 33 115 927 556 NSW Phone +61 (02) 9827 6400 · NSW Fax +61 (02) 9827 6464 · NZ Phone +64 (09) 525 0245 · NZ Fax +64 (09) 525 0246
sales@ebmpapst.com.au · www.ebmpapst.com.au
W3G500GN3307-LA1
1.11 Storage
 Store the device, partially or fully assembled, in a dry and
weatherproof manner in the original packing in a clean
environment.

Protect the device from environmental impacts and dirt
until the final installation.

We recommend storing the device for no longer than one
year in order to guarantee trouble-free operation and
longest possible service life.
 Even devices explicitly intended for outdoor use are to be
stored as described prior to being commissioned.
 Maintain the storage temperature; see chapter 3.5
Transport and storage conditions .
 Make sure that all screwed cable glands are fitted with
dummy plugs.
2. INTENDED USE
The device is exclusively designed as a built-in device for
moving air according to its technical data.
Any other or secondary use is deemed improper and constitutes
a misuse of the device.
Installations on the customer's side must meet the mechanical,
thermal and service life-related stresses that can occur.
Intended use also includes:

Use the device in power systems with earthed neutral
(TN/TT power systems only).
 Using the device only in stationary systems.

Performing all maintenance work.

Moving air with a density of 1.2 kg/m
3
.

Using the device range within the permitted ambient
temperature range, see chapter 3.5 Transport and
storage conditions and chapter 3.2 Nominal data.

Operate the device with all protective features.

Following the operating instructions.
Improper use
Using the device in the following ways is particularly prohibited
and may cause hazards:

Operating the device in an imbalance state, e.g. due
to dirt deposits or ice formation.

Operating in medical equipment with a life-sustaining
or lifesaving function.

Operating with external vibrations.

Moving solids content in flow medium.

Painting the device.

Connections (e.g. screws) coming loose during
operation.

Opening the terminal box during operation.

Moving air that contains abrasive particles.

Moving highly corrosive air, e.g. salt spray.
Exceptions are devices that are designed for salt
spray and protected accordingly.

Moving air with dust content, e.g. suctioning off saw
dust.

Operating the device close to flammable materials or
components.

Operating the device in an explosive atmosphere.

Using the device as a safety component or for taking
on safety-related functions.

Operation with completely or partially disassembled
or modified protective features.

In addition, all applications not listed among the
intended uses.