Operating instructions
K3G710-PV05-02
Translation of the original operating instructions
3. TECHNICAL DATA
3.1 Product drawing
All dimensions in mm.
1
Inlet ring with pressure tap (k-factor: 545)
2
Mounting position for vibration-absorbing elements, tightening torque max. 40 Nm
3
Cable diameter min. 5 mm, max. 13 mm, tightening torque 4 ± 0.6 Nm
4
Cable diameter min. 16 mm, max. 20.5 mm, tightening torque 6 ± 0.9 Nm
5
Tightening torque 3.5 ± 0.5 Nm
6
Attachment holes for FlowGrid (50710-2-2957 not included in scope of delivery)
7
Motor support plate
Installation position: shaft horizontal (motor support plate must stand upright) or rotor on bottom; rotor on top on request
The drawing shows the dimensions only and does not represent the installation position
Item no. 55980-5-9970 · ENU · Change 212420 · Approved 2020-02-17 · Page 4 / 15
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · [email protected] · www.ebmpapst.com
