ebm-papst A3G710-AU21-01, Руководство по эксплуатации

Страница: 9 / 14

Operating instructions
A3G710-AU21-01
Translation of the original operating instructions
Fans installed upright
When routing the cable, make sure that the cable glands are located at
the bottom. The cables must always be routed downward.
Fig. 4: Cable routing for fans installed upright.
4.4 Factory settings
Factory settings made for the device by ebm-papst.
Mode parameter set 1 PWM control
Mode parameter set 2 PWM control
Fan/device address 01
Max. PWM / % 100
Min. PWM / %
5
Save set value to
EEPROM Yes
Set value requirement Analog (linear)
Direction of action
parameter set 1
Positive (heating)
Direction of action
parameter set 2 Positive (heating)
Item no. 50186-5-9970 · ENU · Change 205900 · Approved 2020-08-27 · Page 9 / 14
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com