Step 2 —
Place your Hector assembly ring
(D) on the table leg, lowering to a
center position.
• Make sure the assembly ring
is leveled even horizontally.
• The small hole on the
assembly ring should be
facing the floor when the table
is in place.
Step 3 —
Through the holes in the assembly
ring, gently mount the remaining
4 Hector table legs (B) and do not
tighten completly, until all 5 legs
are mounted.
• When all table legs are
mounted, make sure the
assembly ring is horizontally
level placed at center position.
• Tighten the table legs
completly.
Step 4 —
Gently lift your Hector dining
table and flip it over to its natural
position.
Congratulations, your new Hector
dining table is now ready for use.
