A
B
C
D
Step 1 —
With your Hector table top (A)
turned upside-down on a soft
surface, begin by mounting one
Hector table leg (B), and make sure
that there is a protective washer
(C) placed in between the table leg
and table top bracket.
Do not tighten leg completely.
Hector —
Assembly Guide
Before we get started:
• We recommend that you leave the table in its original packaging at room temperature for 24 hours after
receiving the table. This is to acclimate.
• Make sure that all parts are included in the packaging.
• Protect the table from scratches by assembling it on the cardboard box itself or use a large blanket/carpet.
• We do not recommend assembling the table alone, you should be a minimum of two people.
A. Hector table top ( 1 )
B. Hector table legs ( 5 )
C. Protective washers ( 5 )
D. Hector assembly ring ( 1 )
