Eberg ZOY, Инструкция по эксплуатации

Страница: 10 / 14

ZOY GB
9 www.eberg.eu
CONTINOUS DRAINAGE
REMOVABLE WATER TANK
CLEANING AND MAINTENANCE
In this case please turn the device off and remove the water tank. You
will notice a condensate drain hole. Insert the included condensate
drain pipe into the drain hole and put the water tank back into the
dehumidifier. Put the other part of the drain tube into a sink, bucket,
etc. and turn on the dehumidifier again. The dehumidifier will collect
water, and this through the pipe will flow directly to the washbasin, etc.
When the water tank is almost full, the device will turn off automatically and the red „FULL” LED will light,
indicating that the water tank needs to be emptied.
To remove the water tank, first turn the dehumidifier off , then remove the water tank from the device
and pour the water out into the toilet or bathroom. Put the water tank back into the machine. To continue
dehumidification, switch the dehumidifier back on.
Before cleaning the unit or other maintenance activities, switch off the device first and disconnect it from
the power source. Only a soft cloth should be used for cleaning the device’s surface.
The air vents and the air inlet grille can be cleaned with a soft-bristled dust brush.
The water tank should be cleaned regularly under running water after disassembly.
After that, the tank should be allowed to dry completely.
DANE TECHNICZNE
INFORMATION ON CORRECT DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH THE EUROPEAN DIRECTIVE 2012/19 / EU
Model
EBERG ZOY
Voltage/ Frequency 220-240V~50Hz,
Power 65W
Dimensions (L)245mm X (W)137mm X (H) 375mm
Water tank capacity 2l
This device has been tested in accordance with all applicable standards and directives, such
as the electromagnetic directive and the low voltage directive, and has been constructed in
accordance with the latest safety requirements.
After useage, the device must not be disposed of with other household waste. We pay
particular attention to the key role of the consumer in the recycling of this type of waste.
The device must be disposed of at a waste disposal center. Sorting waste such as old
electrical and electronic equipment prevents negative consequences for the environment
and human health which could result from inappropriate disposal of such waste. Sorting
such waste allows the materials from which these devices are made to be recovered,
resulting in significant energy and resource savings. Such disposal requirements are
marked with the label of the crossed waste container placed on the device.