5
REQU+ / REQU R+ REMOTE CONTROL USER INSTRUCTIONS
COMMANDS LIST
S
Surveillance Function
A
Automatic Mode
V
Speed Selection
H
Humidity Limit selection
F
Air Flow Direction
I
Intake Air Function
E
Extract Air Function
COMMANDS INSTRUCTIONS
S – Surveillance Function (sleep mode)
Pressing the button “SURVEILLANCE” the product remains in sleep mode with the damper closed, but keeps the
sensors activated. In case some environment parameters like humidity or CO2 exceed the set value, the product
automatically runs in extraction mode at the maximum speed until reset values, then it returns in sleep mode. This
function is very useful in case of long absence.
Response:
Light pulse on activation of the modality
Red
Light pulse modality activated (every 1 min.)
White/Red
Light pulse steady, value over set
Red
A – Automatic mode
By using the automatic mode the product runs 70 seconds in extraction and 70 seconds intake at the medium
speed. Pressing the button “AUTO” the product performs routing check of the active sensors (night function,
humidistat and CO2 if present), in case values are over the set parameters, the product extracts air from the
environment at the maximum speed until restoring the threshold value. Product is equipped with twilight sensor
(night function) . On the decrease of the intensity of the light, the product reduces the speed at the minimum to
lower the noise generated by the air.
Response:
Light pulse on activation of the modality
White/Red
Light pulse modality activated (every 1 min.)
None
Light pulse steady, value over set
Red
V5
V4
V3
V2
V1
I
F1
S
H3
H2
H1
A
E
F2
