Eberg Qubo Q40NE, Инструкция по эксплуатации

Страница: 28 / 46

QUBO EN
28 www.eberg.eu
1. POWER button
Press to turn on / off the device.
2. FUNCTION button
Press to select the appropriate operation mode: cooling, heating, drying.
3. Temperature regulation (UP)
Press this button to increase the temperature setting. A single press changes the setpoint by 1ºC.
The maximum temperature value is 30ºC in cooling mode and 25ºC in heating mode.
4. Temperature regulation (DOWN)
Press this button to decrease the temperature setting. A single press changes the setpoint by 1ºC.
The minimum temperature is 17ºC in cooling mode and 15ºC in heating mode.
5. LED display
The display shows the current temperature or timer setpoint and error codes, if any. When setting
the temperature or timer, the new settings are displayed, after completing the setting, the display
shows the current set temperature.
6. SPEED button
Press the button to select the fan speed from the available options: low speed, medium speed, high
speed or automatic mode. If the AUTO function (in cooling mode) has been selected, the fan speed
will be selected automatically based on the difference between the set temperature and the current
ambient temperature.
Note: In the heating and dehumidifying functions, this button is inactive because the unit
automatically runs at high speed in heating mode and low speed in dry mode.
7. TIMER button
Timer on / off button.
TIMER ON: automatic switching on of the device after a preset time.
1.Press the TIMER button in standby mode to set the desired number of hours after which the device
will start working.
2. Select the mode in which the device is to be turned on.
3. After the set time has elapsed, the device will start working.
4. Pressing the POWER button within the set time will cancel the TIMER settings and turn on the
device.
TIMER OFF: automatic shutdown of the device after a preset time.
1. Press the TIMER button during operation of the device to set the required number of hours after
which the device will turn off.
2. Pressing the POWER button within the set time will cancel the TIMER settings and turn the device
off.
8. SLEEP function button
When the SLEEP mode is active in cooling mode, after the first hour of operation, the temperature
will increase by 1ºC, after another hour, the temperature will increase by another 1ºC, and then
remain at this level.
When the SLEEP mode is active in heating mode, after the first hour of operation, the temperature
will drop by 1ºC, after another hour, the temperature will decrease by another 1ºC, and then remain
at this level. Press the SLEEP button again to cancel the function.
9. SWING function button
Press this button to start the automatic louver movement - changing the direction of airflow in the
horizontal plane. Press this button again to disable this function.
10. WiFi control
The air conditioner has a control function via WiFi. To connect the device to the WiFi network, install