Eberg HRO 45, Инструкция по эксплуатации

Страница: 8 / 12

HRO 45 EN
8 www.eberg.eu
1. SCREW
2. FRONT GUARD
3. GUARD CLIPS
4. BLADE
5. SET SCREW
6. NUT
7. SQUARE BOLT
8. REARGUARD
9. MOTOR
10. SCREW
11. PLASTIC BEARER
12. LOCKNUT
13. SCREW
14. TUBE BASE
15. POWER CORD
16. CONTROL BOX
17. WASHER
18. NUTS
19. HANGING HOOK
20. SCREW
COMPONENTS
DEVICE OPERATION
a) Selection of fan speed
To select the fan speed, use the knob.
Knob in position:
0 – the fan is turned off,
1 – the lowest fan speed,
2 – the medium fan speed,
3 – the highest fan speed.
b) Adjusting the tilt
To adjust the fan’s inclination angle, push or pull the fan at the top of the casing. It is possible
that for better accuracy and convenience of adjustment, it will be necessary to loosen the nuts
securing the housing to the base.