CONVY
EN
15
www.eberg.eu
and hold the Wi-Fi button for 5 seconds. When the unit is turned back on it will start with the WiFi
turned off, until reactivated following the steps above.
8.1. Use your phone to scan the QR code below or search and download the “Tuya Smart” application.
8.2. Register and log in to the application.
8.3. Connect the device to the power supply and make sure that it is within the range of the network.
8.4. Adding the device in manual mode.
8.4.1. To add a new device, press
the “+” button in the top right
corner of the screen.
8.4.2. Select the type of device
as “Heater (Wi-Fi)” within the
Home Appliance tab.
8.4.3. Your network, in which
the device will be used, must
operate in the 2.4GHz band. Set
the network and password.
