CONVY
EN
13
www.eberg.eu
4. FOOT ASSEMBLY
Before using the heater, the feet (supplied separately in the
cartoon), must be fitted to the unit. These are to be attached to
the base of the heater using the 4 self-tapping screws provided,
taking care to ensure that they are located correctly in the
bottom ends of the heater side moldings.
Note: It is normal when the heaters are turned on for the first
time or when they are turned on after having been used for a
long period of time the heaters may emit some smell and fumes.
This will disappear when the heater has been on a short while.
5. OPERATION PANEL FUNCTION INTRODUCTION
1. Selected heating level display
9. Running time display
2. "Fan" symbol
10. Set temperature display
3. "Frost protection" symbol
11. Measured temperature display
4. Selected unit of measurement display
12. Power
5. Fan button
13.
Infrared receiver for remote control
6. Increase temperature
14.
Wi-Fi button
7. Reduce temperature
15.
Button for selecting the heat setting
8. Timer button
16.
Wi-Fi indicator lamp
6. REMOTE CONTROL
1. ON/OFF button
2. Fan button
3. Wi-Fi button
4. Increase temperature
5. Timer button
6. Button for selecting the heat settings
7. Reduce temperature
