Guarantee certificate
T-18
Ebeco AB provides a 10 year guarantee for defective ma-
terials in heating cable and accessories.
The guarantee only becomes valid under condition that
the heating cable and accessories are installed by a qua-
lified electrician according to the applicable regulations
and in accordance with installation instructions issued by
Ebeco AB. This guarantee certificate must be completed
in its entirety and, along with the materials specification
or invoice, must be signed by the electrician who carried
out the installation.
If defects covered by the guarantee should arise during the
first five years, Ebeco AB undertakes to repair or replace
both the heating cable and accessories, and also stand for
the cost of the replacement. If defects should arise during
the following 5 years Ebeco AB will repair or supply new
material for replacement.
The guarantee does not apply to installations that have been
carried out by an unqualified electrician or alternatively
if an unqualified electrician has carried out modifications
or repairs. Nor does the guarantee apply if the defect has
arisen as a result of using incorrect materials, for example
unsuitable connection boxes, or as a result of incorrect
installation. Furthermore, nor is damage covered that is
a result of vandalism, fire, lightning and water damage
or damage caused by negligence, abnormal usage or as a
result of an accident.
EN
100208
In the event of a material defect arising that is covered by the
guarantee, in the first instance the qualified electrician who
carried out the installation should be contacted to locate
faults. Before fault localization, repair work or other measures
are taken Ebeco AB must be contacted for approval. A condi-
tion for the guarantee to be utilized is that the material defect
covered by the guarantee is reported to Ebeco AB no later than
4 weeks after the electrician is contacted to locate the fault.
In the event of the guarantee being invoked, this guarantee
certificate with accompanying invoice of installation, material
specification plus completed and signed test record must be
presented.
EBECO AB
Martin Larsson, MD
Electrical installation carried out by:
------------------------------------------------------------
according to enclosed materials specification.
Date: --------------------------------------------------
Signature: -----------------------------------------------------
ebeco.com
