35
EN
EB-Therm will then stop heating for
15 minutes before returning to nor-
mal mode. This function is always
active.
Delay between turning off and on
There is a built-in delay in order to
avoid unnecessary wear and tear on
internal components and to extend
the life of the thermostat. If you
raise the desired temperature so
that the thermostat comes on, and
then lower it shortly afterwards, it
takes four minutes before it goes off
again.
Current status
The heat symbol allows you to see
the current status of EB-Therm. See
the
Symbols on the display
section.
Symbol on
- the thermostat is on
and the underfloor heating is acti-
vated.
Symbol off
- the thermostat is
on and the underfloor heating is
switched off.
Control functions
EB-Therm 205 can regulate the tem-
perature in three different ways. This
enables the comfort temperature and
any flooring temperature require-
ments to be combined.