ebatec GS 21, Руководство по эксплуатации

Страница: 5 / 18

Emptying the Machine
Press the mains switch (1). The control lamp is switched off. Open the door, take
out the basket with the clean bottles or the crate (if there is a basket in the machine),
pull out the
overflow pipe the rinse water will automatically drain out of the tank.
Interior Cleaning
If the interior of the machine got dirty, it should be
cleaned
.
Clean soiled nozzles. If you screw off the nozzles, imperatively reinsert them in the
same position.
Page 5
Remove the suction filter and clean it, if
required.
Remove the rinsing arms by slightly turning
them to the left and slightly pull them out
of the bayonet insertion.
Make sure that the water drains at even amounts
and rapidly out of the tank.
After finishing work, the machine has to be drained.
Do not leave soapy water in the machine any longer
than it is necessary.
ATTENTION
THE WATER TEMPERATURE IN THE TANK COULD BE
MORE THAN 53º C; THERE IS A RISK OF MINOR
BURNS.
Remove the surface filters and remove the labels
and any dirt.
Please observe: All components in the machine run
quiet smoothly
Do not apply any force, otherwise parts might
break or get damaged.
You may easily clean the interior of the machine.
Close the door, switch on the machine by pressing
(1) the mains switch and wait for about 20 sec. The
fresh water sprays into the interior.
(It is necessary to take out the overflow pipe)