Ebasto Thermo Top TTC, Руководство по эксплуатации

Страница: 34 / 50

4 Installation Thermo Top (TTC)
Timer installation Instructions:
1. Select a suitable location in the vehicle dash for the timer.
2. Temporarily affix timer drilling template to dash or see timer dimensions.
3. Cutout hole to dimensions on template or timer dimensions.
4. Mount timer bezel to dash.
5. Route harness between heater and dash, secure harness along its length with wire ties. If possible, use existing hole in
bulk head or drill in suitable location. Protect the harness with a grommet at the bulk head.
6. Connect the terminals of the harness to the timer. See figure 409 below and wiring diagram figure 411 for reference.
7. Push timer into place in dash bezel.
Pin Number Description Wire Color
1 +12 / 24V Red
2 GND Brown
3 Heater Output Black
4 Diagnostic Blink Code Green
Fig. 410: Optional SmarTemp Control fx
Relay Connection: (If applicable)
Heaters requiring a higher amperage signal will require a relay to accommodate different heater specifications.
If the connected heater requires more than a 1A signal to start use the pin-out of a standard relay below.
Relay Output
Relay Pin 30 Battery (B+) power source
Relay Pin 85 Ground
Relay Pin 86 Switched 1A signal wire from pin 3 of SmarTemp Control fx harness.
Relay Pin 87 Output source to heater (on/off signal)
420