EBARA ESA500W Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 81

EBARA ESA500W Скачать руководство пользователя страница 55

P.42

PM10U

EBARA

CORPORATION

7. Operation

7.1 Before Starting

(1) Turn on the cooling water supply and check that there are no leaks at the

pipe connections.

CAUTION

Without sufficient cooling water, the pump temperature will rise

and problems such as rotor contact will occur.

[ NOTE ]

The pump unit itself has no cooling water flow adjustment valve.

(2) Turn on the N2 gas supply.

Check  that  the  regulator  attached  to  the  pump  is  closed.  (It  is  closed  when
the  pressure  adjustment  knob  is  fully  turned  in  the  counterclockwise
direction.)  Open  the  main  valve  and  check  that  there  are  no  N2  gas  leaks
from the pipe connections.
Slowly  turn  the  pressure  adjustment  knob  clockwise  to  set  the  pressure
(gauge  pressure)  to  0.1  MPa  first.  Then  press  the  red  stopper  to  lock  the
knob in position.

WARNING

Be sure to purge with N2 gas in order to prevent corrosion and

reduce the formation/deposition of reaction by-products in the
pump. When inflammable and/or toxic gases are diluted with
N2 to the safe concentration, be sure to maintain a separate
supply of N2 gas to the pump exhaust pipe.

CAUTION

Abrupt rotation of the pressure adjustment knob will cause the

pressure indicator needle of the regulator to wobble and result
in an inaccurate pressure display.

CAUTION

Unless a sufficient supply of N2 gas is maintained, serious

problems will occur such as oil back flow or pump corrosion
and accretion of reaction by-products.

«
...
53
54
55
56
57
...
»

Содержание ESA500W


















































































Отзывы:

Нет отзывов